Bag-in-Box
10 L bag with small yellow spout for clean, controlled dispensing. Suitable for water-based liquids, cleaning & care products, and food/chemical uses with repeated opening. Key benefits:Integrated spout for precise dosing and reclosureMulti-layer film with EVOH barrier; heat-resistant LLD/LDPE inner film Key data: Feature Specification Dimensions 375 × 500 mm Outer film 66 µm EVOH transparent Inner film 50 µm LLD/LDPE transparent, heat resistant Interface amkkM + pouring spout, closed Packaging unit 350 pieces per box Weight ≈ 59 g Do you have any other questions?Write to us at info@tesseraux.de— we’ll be happy to advise you on the optimal packaging solution.
Bag-in-Box 2.25 Liter Set – Carton and Bag A set consists of a carton with a particularly protective base and a bag. Perfectly suited for filling liquids such as juices, wine, oils, and many other products. Capacity: 2.25 liters, special closure according to the new guideline. Neutral brown color for printing or labeling, especially stable with 2.9 mm B-wave carton. Carton dimensions: 151 x 106 x 222 mm (Length x Width x Height) Bag dimensions: 245 x 300 mm (+/- 5 mm) Closure: iTap solo Internal material: LLD/LDPE 50 μm External material: EVOH 66 μm Filling instructions: Lay the bag horizontally and fill with the liquid. Press out any trapped air bubbles as much as possible. Attach the tap, and for hot filling (around 80°C), place the bag in the carton with the tap facing upward and allow it to cool down to around 25°C. Never lift hot bags by the tap. Safety instructions: Risk of scalding! When filling and transporting hot bags, wear closed shoes, long pants, and light aprons. Do not hold or pass hot bags over people.
10 L postmix bag (small CMB fitting) with EVOH barrier for beverage postmix and technical liquids. Designed for dispenser connections with reliable sealing and robust seams for storage and transport. Key benefits: Consistent oxygen barrier (EVOH) for quality-critical productsCompatible with postmix/CMB fittings; reliable sealing Key data: Feature Specification Dimensions 375 × 500 mm Outer film 66 µm EVOH transparent Inner film 50 µm LLD/LDPE transparent, heat resistant Interface amkkM + CMB small (Postmix) Packaging unit 400 pieces per box Weight ≈ 59 g Do you have any other questions? Write to us at info@tesseraux.de— we’ll be happy to advise you on the optimal packaging solution.
Bag-in-Box 3.75 Liter Set – Carton and Bag A set consists of a carton with a particularly protective base and a bag. Perfectly suited for filling liquids such as juices, wine, oils, and many other products. Neutral brown color for printing or labeling, especially stable with 2.9 mm B-wave carton. Carton dimensions: 191 x 116 x 222 mm (Length x Width x Height) Bag dimensions: 295 x 340 mm (+/- 5 mm) Closure: TECOTAP Internal material: LLD/LDPE 50 μm External material: EVOH 66 μm Filling instructions: Lay the bag horizontally and fill with the liquid. Press out any trapped air bubbles as much as possible. Attach the tap, and for hot filling (around 80°C), place the bag in the carton with the tap facing upward and allow it to cool down to around 25°C. Never lift hot bags by the tap. Safety instructions: Risk of scalding! When filling and transporting hot bags, wear closed shoes, long pants, and light aprons. Do not hold or pass hot bags over people.
Bag-in-Box 4.5 Liter Set – Carton and Bag A set consists of a carton with a particularly protective base and a bag. Perfectly suited for filling liquids such as juices, wine, oils, and many other products. Neutral brown color for printing or labeling, especially stable with 2.9 mm B-wave carton. Carton dimensions: 211 x 126 x 222 mm (Length x Width x Height) Bag dimensions: 340 x 370 mm (+/- 5 mm) Closure: TECOTAP Internal material: LLD/LDPE 50 μm External material: EVOH 66 μm Filling instructions: Lay the bag horizontally and fill with the liquid. Press out any trapped air bubbles as much as possible. Attach the tap, and for hot filling (around 80°C), place the bag in the carton with the tap facing upward and allow it to cool down to around 25°C. Never lift hot bags by the tap. Safety instructions: Risk of scalding! When filling and transporting hot bags, wear closed shoes, long pants, and light aprons. Do not hold or pass hot bags over people.
The Pillow Liner is a flexible, pillow-shaped inner bag (liner) designed for use inside containers such as IBCs or boxes. It is specifically developed for the transportation and storage of liquids with low viscosity.Your Benefits at a GlanceThe disposable nature of our plastic bags reduces the need to clean barrels or containers, facilitating and optimising the operator’s work, which directly translates into production savings The Pillow Liner is temperature resistant up to 85 °CWhen used in IBCs, it ensures high hygienic standards and minimizes the risk of cross-contaminationSuitable for contact with food products such as sauces, oils, concentrates, chocolate, milk, cream, water, juices, beer, and cellulose Feature Specification Dimensions 2250 x 2120 mm Outlet 2“ DN50 Peak Valve Inlet 2“ BSP Blue Square Gland Inliner Multi-layer LLDPE-film How to fill the Pillow Liner from the top? Video-Tutorial.
Boxli® 1000 – The Bag-in-Box solution for water-based products Each Boxli® is made up of two heavy-duty corrugated outer boxes with a multi-layer LDPE inliner system, securely placed on a CP3 pallet. Specially designed for non-hazardous, water-based goods – from paints, dispersions, and adhesives to household, food, and agricultural products – Boxli® 1000 delivers maximum product protection with minimal material use. Your benefits at a glance:Nominal volume 1,000 L, max. filling weight 1,100 kg – perfect for bulk applications PPWR-compliant and biocide-free thanks to innovative packaging technology Up to 90% recycled content and 95% overall recyclability Assembly in < 60 seconds – saves time compared to conventional solutions 70% less empty-transport and storage volume – logistics costs reduced by up to 30% Up to 50% CO₂ reduction by eliminating return transports ISTA®-3E certified robustness for maximum transport safety Feature Specification Outer dimensions (assembled) approx. 1,140 × 1,140 × 1,180 mm (L × W × H) Pallet CP3 Outlet DN50 butterfly valve with S60x6 thread Inlet DN150 screw cap with S165x7 thread Inliner Multi-layer LDPE film Further details can be found in the Technical datasheet.Watch the quick setup in our Video-Tutorial.Do you have further questions?Write to us at info@evopack.tech – we will be happy to advise you on the optimal bulk packaging solution with Boxli® 1000.